GoPro Volta Guia Del Usuario página 2

The First Step
You may need to upgrade your camera's software before you can use Volta.
For step-by-step instructions, go to gopro.com/update.
The Basics
Volta (Battery Grip/Tripod/Remote)
1
8
2
3
9
4
10
5 11
6
12
7
Thumb Screw
Secures your
GoPro to Volta.
1. Swiveling Camera
Mounting Fingers
2. LED Battery/Camera
Status Indicators
3. Bluetooth® Button
4. Flip-Out Mounting Fingers
5. Mode + Power Button
6. Tripod Legs
7. 1/4-20 Mount
8. Camera Cable
9. Battery Status Button
10. Shutter Button
11. USB Charging Port
(Under Port Cover)
12. Lanyard Attachment Point
USB Pass-Through Door
Lets you plug Volta into
your GoPro while keeping
it weather resistant.
Charging Volta
1. Flip open the USB charging port cover.
2. Insert the included USB cable into the port. Connect the other end of the cable
to a USB power source.
3. Push the Battery Status button
The blinking LED shows the battery status while Volta is charging. All LEDs will be lit
when the battery is fully charged. Press the Battery Status button
charge level when Volta is not charging.
LED Power Indicators
TECH SPECS
• Battery capacity: 4900 mAh
• Power input: 5VDC / 3A (15W max)
• Power output: 5VDC / 2.4A (12W max)
• Charge time: 2.5 hours with GoPro Supercharger (sold separately) or other
5V / 3A charger.
A fully charged Volta will triple a fully charged camera's normal battery life.
Battery life may vary based on usage and other external conditions.
CAUTION: To keep Volta weather resistant, be sure the USB port cover is fully
closed and the seal is tight after charging.
to start charging.
to check the
LED 1 LED 2 LED 3 LED 4
1-20% 21-40% 41-60% 61-80%
LED 5
81-99%