Assembly Of The Electric Scooter; Como Plegar El Patinete Eléctrico - Olsson and Brothers FRESH NEON Manual De Usuario Y Garantía

8. ASSEMBLY OF THE ELECTRIC SCOOTER

1
3
9. HOW TO FOLD THE ELECTRIC SCOOTER
Before folding your scooter, make sure it is turned off
1
Warning: If you notice any vibra-
tion of the handlebar while riding,
check that the screws of the fol-
ding mechanism are tightened
securely.
2
Unfold the
vertical bar
and secure
it with the
Smart
Security lock
Place the 4 screws included to attach the
handlebar to the bar
WARNING: Screw in all crews softly to ensure that they are
properly positioned and once secured, tighten them with
the allen wrench.
Tightening the screws one by one may cause them to
eventually not fit correctly.
Press the power button located on the display.
2
Install the
handlebar
head on the
vertical bar
and make
sure that the
wires are on
the inside
3
EN
19