Working Environment - GLI Gomer Manual Del Usuario

7 Charging
To charge Gomer, plug the charger into the charging jack and connect him to a power source. The
indicator light will turn a solid orange. When the indicator light turns a solid green, he is fully charged.
Please note that only our own charger is compatible with Gomer. Use of other hardware may cause
damage or injury.
Normally, one batter charge will take 3 hours, and Gomer will work for about 3hours. When you
disconnect the charger, Gomer will enter "information display mode" and be quiet. Click the button
to wake it up.
If you do not have an immediate use for Gomer, turn it off, otherwise the battery will be drained.
CHARGER DETAILS：
Model: MX24W1-1202000U
Input: 100-240V ~ 0.7A 50-60Hz
Output: 12V 2A

8 Working Environment

As Gomer can move and turn around, it is better to provide it a large working space. The ground should be flat and firm to
help Gomer perform smoothly. Be very cautious about putting Gomer on desks or other high platforms, as it may fall and
break, and even hurt you and others. Gomer perceives and analyzes the environment with its built-in AI and computer
vision technology. Without a bright environment, and with a highly reflective ground, some functions –including facial and
expression recognition – may not work optimally.
English
Charging Jack
7