Parts Diagram; Getting Started - Sunbeam Products Mr. Coffee ART0000883319 Manual Del Usuario

INTRODUCTION
Unlock the fresh ground flavor of roasted coffee beans with your new
Mr. Coffee® Burr Grinder. Grind your favorite whole coffee beans to brew
espresso, drip coffee, pour-over or French Press. Your Mr. Coffee® Burr Grinder
will help you achieve a fresh, delicious cup of coffee every time!

PARTS DIAGRAM

1. Bean Hopper Lid
2. Bean Hopper
3. Unit Base
4. START/STOP Button
1
2
3
4
5
6
3.
5. Cup Size Selector
6. Grind Chamber
7. Grind Size Selector
8. Protective Burr Cover (not
shown)
1
2
3
7
BURR GRINDER FEATURES
Your new Mr. Coffee Burr Grinder has the following features:
Whole Bean Hopper – Large bean hopper holds up to a ½ lb. of coffee beans
at a time.
12 Custom Grind Selections - Choose from 12 different grind selections
from fine (espresso grade) to course (French Press grade) for your customized
brewing method.
12 Cup Size Selections - Perfect portions every time with automatic cup size
settings from 2-12 cups.
Automatic Shut-Off - Eliminates the guesswork by automatically stopping at
the desired portion chosen.
Removable Ground Coffee Chamber - Lets you easily transfer ground coffee.

GETTING STARTED

Make sure that your first cup of coffee is as good as can be by cleaning your
Mr. Coffee Burr Grinder before its first use. Just follow these simple steps:
1. Remove Grind Chamber by pulling it out of the unit.
2. Remove Bean Hopper Lid and Protective Burr Cover. To remove the
Protective Burr Cover, twist the knob located inside the Bean Hopper
counterclockwise to unlock (towards the unlock symbol), then pull cover
out.
3. Clean the Bean Hopper with a damp cloth or paper towel. Do not immerse
or run water to clean
4. Wash Bean Hopper Lid, Protective Burr Cover, Grind Chamber and Lid
with warm soapy water.
CAUTION! Never use abrasive cleansers, steel wool pads or other abrasive
materials. Unit is not dishwasher safe.
5. Dry all pieces thoroughly.
6. Place Lid back on Grind Chamber and then install into unit by pushing to
lock into place.
7. Place Protective Burr Cover and lock by turning knob clockwise (towards
the lock symbol).
CAUTION: You MUST have all parts in place to safely use the Burr Grinder.
4.