Kinderkraft Route Manual De Usuario página 19

Insert front wheels in the front axle (FIG. E) until you can hear a locking sound. To detach front wheels, press the quick
release key located below the footrest above each wheel (FIG. F). The stroller has swivel front wheels which can be locked
so that they go straight forward. To lock the straight-ahead wheel, move the ring above the wheel (FIG. G).
NOTE! Before you start using the stroller, make sure all wheels
have been properly installed.
IV. HOW TO INSTALL THE SUNSHADE
NOTE ! Install the sunshade before you start using the stroller.
Installing the sunshade, slip fasteners into guides on both sides of the frame until they lock (FIG. H). Next fasten Ve lcros
on both sides of the sunshade. A properly installed sunshade is presented in (FIG. I). To unfold another layer of the
sunshade, unzip and pull the sunshade (FIG. J). The sunshade must be detached in accordance with the aforesaid steps in
a reversed order.
V. HOW TO INSTALL/DETACH THE PROTECTING BOW, RAIN COVER, THE CUP HOLDER AND MOSQUITO NET
Insert the protecting bow in relevant holes on both sides of the frame (FIG. K). To detach it, press keys on both sides and
remove the bow. To install the mosquito net, take it out below the footrest (FIG. L), next put it on the stroller and secure
with cuffs on both sides of the frame (FIG. M). The rain cover can be secured just like a mosquito net. Fit the cup holder
to the shank on the right hand side of the stroller.
VI. HOW TO USE THE BRAKE
The stroller is equipped with a foot parking brake located on the rear axle. Press the lower part of the brake, the brake is
active when you can hear a locking sound. To unlock it, press the upper part of the brake (FIG. N).
VII. HOW TO ADJUST THE BACKREST AND FOOTREST AND PARENT'S HANDLE
The seat backrest can be smoothly adjusted from the lying to sitting position with the use of a buckle (FIG. O). The footrest
has 3 adjustment levels. Press keys on both sides in order‫ى‬to‫ى‬change‫ى‬position‫ى‬of‫ى‬the‫ى‬footrest.‫ى‬The‫ى‬parent's‫ى‬handle‫ى‬has‫ى4ى‬
adjustment levels (FIG. P).
VIII. SAFETY BELTS
Seat belts need to be adjusted each time to ensure proper protection of the baby.
The belts of this stroller are adapted to newborn babies. Always use the fastening system. Shoulder belts can be installed
at one of three heights. Press the button to open the buckle (Fig.R). To secure your child, slide the hip and shoulder straps
into the centre buckle until they engage (Fig.S). (For cleaning) Take shoulder, hip and crotch belts out of holes. To remove
the seat belts , insert the shoulder straps and hip straps through the holes in the seat backrest and pull up the crotch
strap.
IX. HOW TO DETACH THE SEAT COVER
Detach the sunshade, safety belts and protecting bow. To remove the seat cover, undo snap fasteners on the stroller
frame, take it out of hooks and detach the belt on both sides of the frame. Next detach Velcros and zips below the seat
and footrest, and take inserts out. Before you take the upper backrest and seat stiffener out, detach the belt under the
seat. The seat must be installed in accordance with the above-stated steps in a reversed order.
X. HOW TO FOLD THE STROLLER FRAME
Folding the stroller, move the key (I) and press the‫ى‬large‫ى‬key‫(ى‬II)‫ى‬located‫ى‬on‫ى‬the‫ى‬parent's‫ى‬handle‫(ى‬FIG.‫ى‬T). Next push the
stroller down to fold it (FIG. U).
XI. CARE AND MAINTENANCE The buyer is responsible for proper installation of all functional elements as well as for
carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition. The
buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child's
safety and prevent shortening of the product life have been presented below:
•‫ى‬Check‫ى‬the‫ى‬strength‫ى‬and‫ى‬safety‫ى‬of‫ى‬all‫ى‬rivets‫ى‬and‫ى‬connections.
• Check all wheel locking equipment and tyres. If necessary, replace or repair.
•‫ى‬Check‫ى‬if‫ى‬all‫ى‬safety‫ى‬devices‫ى‬work‫ى‬properly,‫ى‬particularly‫ى‬the‫ى‬main‫ى‬and‫ى‬additional‫ ى‬fasteners that should move freely at
any time.
If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease based products as they attract dirt, which
makes buggy movement difficult. Please stop using the stroller if you have doubts about its proper use or suspect any
danger.
XII. CLEANING
Wash‫ى‬at‫ى‬max.‫°03ى‬C,‫ى‬gentle‫ى‬process.
Do not bleach
Do not wash. Clean the product gently with a
damp cloth and a mild detergent.
Do not iron
19