Installation - Selecta HOTCOLD F 2101517 Manual De Instrucciones

MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
CÓDIGO 80411 REV 0
These cabinets are commonly used to preserve products under fixed con-
ditions. The equipments do not generate humidity. Very dry environments
can affect the operation of these equipments.

INSTALLATION

Place the cabinet on a flat horizontal, level surface, leaving a space
of about 10 cm at the back and sides of the equipment.
For a maximum efficiency, do not place the machine in direct sunlight
or other sources of heat.
Connect the equipment to the mains. Be sure that the voltage supply
is the same as the one indicated on the characteristics plate. Do not
use the equipment if it is NOT earthed.
Note: Before connecting it to the mains, it is advisable to leave the
machine at rest for 24h to stabilize oil and gas cooling unit.
If you have to change the plug cap, bear in mind the following:
Blue cable: Neutral.
Brown cable: Phase.
Yellow/green cable: Earth.
Check that the circuit breaker on the electrical panel (4) is powered.
See "Electrical panel" section on the "Operation" chapter.
Do not use the cabinet for thermal treatment of products which
can give off vapours capable of making an explosive mixture.
Notice to customers:
The product is made up of various components and various materials that must
be recycled or, failing that, deposited in the corresponding debris removal sites
when the product's life has been completed or when otherwise it is necessary
to dispose of it. To do this, the end user who acquires the product must know
the current regulations of each municipality and / or locality based on the waste
electrical and electronic equipment. The user who acquires this product must be
aware of and responsible for the potential effects of the components on the envi-
ronment and human health as a result of the presence of hazardous substances.
Never place the product in a conventional container of citizen scope if a previous
dismantling and knowledge of the components that incorporates. If you do not
know the procedure to follow, consult with the city council for more information.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
01/2022 Pag.: 12
Tel 34 937 700 877 Fax 34 937 702 362