Folding Steps - Pact URBANGLIDE RIDE AR 2 Manual Original

Folding steps

In order to pull on the folding
handle, the safety catch must
be removed by pulling on the
loop on the right.
Adjust the size of your handlebars by
loosening the clamp on the stem. Be
careful not to exceed the height limit
indicated. Check that your handlebars are
stable and that the clamp is tight.
Then pull the folding handle to unfold your scooter.
Straighten the stem, and raise the handlebars upwards.
Once you have straightened up to the maximum, return
the folding handle to its original position.
To fold your scooter, pull the
safety loop.
Then pull the folding handle and lower the
stem towards the tray of your scooter. Once
you have lowered it as far as it will go, return
the safety buckle to its original position.
8
Then return the safety buckle
to its original position, and
make sure your handlebars are
stable.