Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LumaPro Operating Instructions
Installation & Operation
Disconnect the power by turning off the circuit breaker or by removing the
appropriate fuse at the fuse box. Turning the power off using the light switch is not
sufficient to prevent electrical shock.
Straight Arm Pole Mounting:
This fixture can be configured to pole and an adapter plate has been included to mount to
the pole. Hole pattern on the pole shall be in accordance with FIG.1. If there is no hole on
the pole, drill holes according to the pattern in FIG.1.
Different adapters are optional, including square pole adapter, 3" round pole adapter
(RPA), 4"RPA, and 5"RPA.
• Tighten the nut plate and adapter on the pole (see FIG.2).
• Insert the fixture into the adapter (see FIG.3).
• Tighten the four M8 screws on the straight arm and secure it to the adapter (see FIG.4).
• Connect the power lead properly, make wirings inside the straight arm, and tighten
the arm door with screws (see FIG.5).
• Inspect installation to ensure fixture is secure.
436R33, 446M61, 446M57, 446M58
LED Area Light
Fixtures
3
Publicidad
Tabla de contenido
