sunjoe 24V-LGT500-LTE Manual Del Operador página 7

2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then plug the
charger into an appropriate AC power outlet. Connect the
charger plug to the charging socket of the battery to start
charging (Fig. 2).
3. The battery will take approximately 5 hours to charge. The
battery indicator LEDs will cycle on one by one during the
charging process. Unplug the charger immediately when
all 3 LEDs are illuminated.
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the battery from the charger.
m
WARNING!
This charger does not automatically turn off
when the battery is fully charged. Please take care not to leave
the battery plugged into the charger. Switch off or unplug the
charger at the mains when charging is complete.
4. Timely recharging of the battery will help prolong the
battery's life. Recharge the battery pack when you notice
a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged, as this will cause irreversible damage to the
battery.
Assembly
m
WARNING!
Do not use this product if it is not
completely assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and completely
assembled or with damaged or missing parts could result in
serious personal injury.
m
WARNING!
Do not attempt to modify this product or
create accessories or attachments not recommended for use
with this product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible
serious personal injury.
If any parts are damaged or missing, please call the Snow Joe
+ Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563) for assistance.
Battery
indicators
Fig. 2
Operation
m
WARNING!
Do not direct the light beam at persons
or animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may result in
serious injury or vision loss.
m
WARNING!
Do not allow familiarity with products to
make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
m
WARNING!
Do not use any attachments or accessories
not recommended by the manufacturer of this product, as they
may result in serious personal injury.
1. Remove the battery compartment cover, then insert the
battery pack into the battery compartment until the push
lock buttons click into place (Fig. 3).
2. Close the battery compartment cover. Make sure the
latches on each side of the cover snap into place and the
battery pack is secured before beginning operation.
Fig. 3
Battery
compartment
m
WARNING!
Battery products are always in operating
condition. Therefore, remove the battery pack when the
product is not in use or when carrying at your side.
®
7
Push lock button
Latch
Battery
compartment
cover