Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
THE EXCHANGE
There are also 2 extra switches, the first is the "SELECT MODE"
This controls the routing of the signals from the two input channels 1 and
2. In Position 1+2 the two inputs are routed to BOTH outputs and in 1 or
2 position.
Channel 1 is routed to Output 1 and Channel 2 is routed to output 2
Using the Bass Exchange pedal.
1/ 2 Instruments, 1 Amplifier
•
Connect instruments to Inputs 1 and 2
•
Function switch OUT
•
Select Mode IN (1+2)
•
Amplifier connected to Output 1.
•
Using the footswitch select the instrument to be played, the
respective
•
metre will illuminate adjust the level.
•
Select the other channel and adjust for a similar level.
•
Now you are ready to go simply press the footswitch to effect the
instrument change.
The second output can be used to drive a second amplifier or used as
a DI.
USER GUIDE
Publicidad
Tabla de contenido
