Features - Auvon AS8016 Manual De Instrucciones

Ocultar thumbs Ver también para AS8016:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Support@iauvon.com
minutes by each setting by pressing the " T " on the device.
When the device is connected well and in output state, the
time remaining is automatically counted down until it turns
off once the time finishes.
9. Press and hold the "
" button for 2-3 seconds to lock
the screen, 2-3 seconds again to unlock the screen.
UK
AFTER USE
1. Turn off the device on by pressing and holding the "
"
button on the side of the unit.
2. Remove lead wire pin from electrode connector by gently
twisting and pulling it out.
3. Lift a corner of the electrode and slowly peel it away.
Avoid touching the gel as much as possible.
DO NOT peel the electrode off by the wire.
4. Remove the electrodes back to the storage bag and
reseal tightly to prevent dry-out. Store at room or cool
temperature and keep out of direct sunlight.
Note:
● Never connects this product with common headphone.
● Please do not touch USB port in the process of using. The
USB port only use for connect the charger(Not included), do
not connect other device.
● The charger(Not included) must be in compliance with
IEC/EN 60601- 1, the use of unauthorized charger(Not
included) can degrade minimum safety.
Warning:
● The stimulator has no any output when it is being charged.
you must take off the electrode pads from your body before
the stimulator charged.

FEATURES

● 4 output channels with 24 different modes
22

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido