Dunsch DU10040-38C3 Instrucciones Originales página 30

The cutting height can be selected among 25 mm, 75 mm.
1. To raise the blade height, grasp the height adjustment lever and move it
toward the back of mower.
2. To lower the blade height, grasp the height adjustment lever and move it
toward the front of mower.
Mulching
The mulching insert prevents grass from being collected by blocking the
collection chute. This allows the grass clippings to be deposited back on the
lawn during cutting.
1. Open the rear deflector guard, hold it in position and insert the mulching
insert into the rear discharge chute. Ensure the lower side of the handle
snaps in place.
2. Press the lower side of the handle to release and remove the mulching insert.
3. When removing the mulching insert, you should drag it to the left side and
remove it from the mower deck.
Charging the battery (Fig.10)
The rechargeable battery is partially charged. Fully charge the rechargeable
GB
Fig.10
28
Fig.9