Working And Transport Position - benza CR 450 Manual De Instrucciones, Uso Y Mantenimiento

When cutting is over, lift the machine until the disc is out of the groove.
Turn the water cock off.
Switch off the engine. Avoid leaving the disc idling.
In the event of an emergency, the emergency press button is easily accessible. It is located to the right of the
wheel regulating disc height.

4.3 WORKING AND TRANSPORT POSITION

The operator will always be facing the controls, at the handlebar area.
ATTENTION!
In order to maintain the efficacy of the machine and prevent "down time", please strictly follow the
maintenance instructions.
9