Avoid Serious Injury To Children From Falling Or Sliding Out:
• ALWAYS use a harness to restrain each child.
• Snugly adjust harness around each child.
• NEVER leave children unattended, even when sleeping. Always keep
children in view.
• DO NOT allow children to climb on stroller or stand in seat.
To Strap Child Into Harness:
1. With harness unbuckled, place child
in seat.
2. Secure child with harness by
positioning Crotch Strap between
childs legs and placing Shoulder and
Waist Belt over shoulders and waist.
3. Align Shoulder Belt Clip with Waist
Belt Clip (Fig. 1).
4. Slide clips together. Push them into
crotch strap buckle (Fig. 2). Repeat for
other side.
5. Snugly adjust each strap by pulling
on the free end of the strap and
moving plastic loop along strap.
Shoulder Belt Adjustment:
Note: Use shoulder belt slots closest to
child's shoulders.
1. Reach through seat back opening and
locate shoulder belt anchor. Turn and
push belt anchor and shoulder belt
through slot in seat back (Fig. 3).
2. Locate desired height and push belt
anchor and shoulder belt back
through slot. Ensure belt anchor is
sticking out the back of the seat.
Rotate belt anchor to lay flat on back
of seat (Fig. 4). Repeat for opposite
shoulder belt.
Crotch Belt Adjustment:
Tighten crotch strap by pulling on the
plastic loop on the strap and moving it
along the strap.
Securing Children in Stroller
WARNING
Fig. 1
Fig. 2
Fig. 3
Fig. 4
12