i-tec CATRIPLEDOCKVGAPD Manual De Instrucciones página 5

Quick Start / USB 3.0/USB-C/Thunderbolt, 3x Display Docking Station / English
In a multi-laptop environment with Windows 7, 8, 8.1, a one-time corporate instal-
lation by a system administrator is possible. For more information on how to install,
read the instructions here: http://www.displaylink.com/downloads/corporate
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO THE
LAPTOP/TABLET)
1) Turn on your laptop/tablet and connect the power adapter to the docking station.
2) Plug the power adapter of the docking station into the AC 110 V / 230 V mains
and press the ON button.
3) Plug the USB-C cable into the USB-C port on the side panel of the dock. Use the
USB-C to USB-A adapter to plug into the USB-A port of your laptop/tablet.
4) Plug the other end into a free USB-A 3.0 / USB-C port on your laptop/tablet.
5) The automatic installation of ports on each system is then initiated.
6) After the installation is complete, restart your laptop/tablet.
If any of these devices are marked with a yellow ! or ?, then the docking station is not
installed correctly. In this case, disconnect the docking station, uninstall the existing
drivers (see the section "Uninstalling Drivers") and reinstall the latest drivers, which
are available for download on our website www.i-tec.cz under the "Download" tab
for this product. Then reconnect the docking station to the laptop/tablet. In case of
problems, you can contact our technical support: support@itecproduct.com.
INSTALLING DRIVERS ON MAC OS X
WARNING! Do not connect the dock to your Mac until you have installed the ap-
propriate drivers. Drivers only need to be installed before first use. We recommend
that you have the latest macOS operating system installed.
Download the drivers from our website www.i-tec.cz under the "Download" tab for
this product and start the installation:
Extract the file to your MacBook desktop as a virtual disk, select "Drivers" and then
"DisplayLink Software Installer". Then select the installation language and follow
the on-screen instructions, entering the user password if necessary. The screen may
flicker during driver installation, this is a standard process. When the installation is
complete, restart your MacBook.
EN | 8
Quick Start / USB 3.0/USB-C/Thunderbolt, 3x Display Docking Station / English
Installing Drivers in Mac OS X
HARDWARE INSTALLATION (CONNECTING THE DOCK TO THE MACBOOK)
1) Turn on your MacBook and connect the power adapter to the dock.
2) Plug the power adapter of the docking station into the AC 110 V / 230 V
mains and press the ON button.
3) Plug the USB-C cable into the USB-C port on the side panel of the dock. Use
the USB-C to USB-A adapter to plug into the USB-A port of your laptop/tablet.
4) Plug the other end into a free USB 3.0 / USB-C port on your MacBook.
5) The automatic installation of the ports will then begin.
6) After the installation is complete, restart your MacBook.
The installed ports are shown in Mac OS X as "USB-C Triple-4K Dock" in "About This
Mac"  "System Profiler"  "Hardware"  "USB".
Viewing the dock on macOS
EN | 9