Safety Instructions - PREMIUM BALLON ACCESSORIES Mini Cool Aire Pro Manual De Instrucciones

The Mini Cool Aire
Aire Inflators. It was designed as a powerful, compact, full-featured air inflator for
®
blowing up all types and sizes of balloons, but now it has the addition of our original
push-down, nozzle-activated switch. Now you can get the performance of our larger
Cool Aire Pro from this more compact and better featured Mini Cool Aire
®
runs about 30-degrees cooler than the Original Mini Cool Aire
1. Place your Mini Cool Aire
until the required Reducer Nozzle is firmly attached to inflator nozzle, if necessary. Please
see number 3 for recommended use of reducers.
2. When using the Mini Cool Aire
inflator nozzle. For continuous operation you must depress the rocker switch to the ON
position.
3. If you need to use the supplied Reducer Nozzles, they should be firmly pushed on to the
inflator nozzle BEFORE the unit is plugged in, since the unit will turn on when the nozzle
is depressed. Make sure that the reducer is firmly attached to the nozzle to prevent it from
blowing off during inflation. All latex balloons, except modeling balloons, can be directly
inflated without the use of reducers.
• Small diameter angled Reducer – use with 9" or smaller foil balloons
• Large diameter angled Reducer – use with 18" or larger foil balloons
• Medium diameter short Reducer – use with latex modeling balloons
1. Warning – To prevent fire or shock. Do Not expose unit to water or moisture.
2. Warning - Do Not place hands, face, or any objects other than the intended Reducer
Nozzle or balloon over the inflation nozzle air discharge hole.
3. Warning – Do Not obstruct the inflation nozzle in any way or the air intake and discharge
vents located at the bottom of the inflator.
4. To reduce risk of electric shock unplug inflator before any external cleaning.
5. Do Not operate unit with damaged cord or plug. If power cord is damaged, it should only
be replaced by authorized service personnel.
6. Make sure cord is situated so that it will not be stepped on, tripped over, or subject to
damage or stress.
7. Operate your Mini Cool Aire
Pro is the newest and best in the evolution of Premium Cool
®
OPERATING INSTRUCTIONS
Pro Inflator on a flat, level, dry surface. Do not plug in the unit
®
Pro, momentary use will occur when you depress the
®

SAFETY INSTRUCTIONS

Pro Inflator only on a flat, level, dry surface.
®
English
Pro that
®
Inflator.
®