Craftsman CMXZSAJ93382 Manual De Instrucciones página 4

English
Adjustable Rolling Shop Stool
CMXZSAJ93382
IMPORTANT SAFETY INFORMATION

WARNING:
instructions, illustrations and specifications
provided with this shop stool. Failure to follow all
instructions listed below may result in personal injury
and/or property damage.
a ) Read, study, understand and follow all instructions
before assembling or operating this device.
b ) Do not stand on the stool.
c ) Weight capacity and other product capabilities apply
to properly and completely assembled product only.
d ) The warnings, cautions, and instructions in this
manual cannot cover all possible conditions or
situations that could occur. Exercise common sense
and caution when using this stool. Always be aware of
the environment and ensure that the stool is used in a
safe and responsible manner.
e ) Do not modify this stool in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the product.
There are specific applications for which the product
was designed.
f ) Use the right tool for the job. DO NOT attempt
to force small equipment to do the work of larger
industrial equipment. There are certain applications
for which this equipment was designed. It will be safer
and do a better job at the capacity for which it was
intended. DO NOT use this equipment for a purpose
for which it was not intended.
g ) Industrial or commercial applications must follow
OSHA requirements.
Personal Safety Warnings

Failure to heed these warnings may result in personal
injury and/or property damage.
a ) Wear the proper personal protective equipment
when necessary. Use ANSIZ87.1 compliant safety
goggles (not safety glasses) with side shields, or
when needed, a face shield. Use a dust mask in dusty
work conditions. Also use non-skid safety shoes,
hardhat, gloves, dust collection systems, and
hearing protection when appropriate. This applies
to all persons in the work area.
b ) Do not overreach. Keep proper footing and balance
at all times.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE
4
Read all safety warnings,
PRODUCT SPECIFICATIONS
Width
Height
Depth
Weight
Seat Capacity
READ ALL INSTRUCTIONS
ASSEMBLY

Before assembling stool, make sure all parts are
present. Compare parts with contents list. If any
part is missing or damaged, do not attempt to
assemble, install, or operate the product.
Contact customer service for replacement parts.
Caster Installation (Fig. B)
NOTICE: All casters should come pre-installed. If a caster is
loose or is not attached, follow step 1.
1. Install the casters 4 by inserting the threaded mounting
post through the mounting holes on bottom side of the
tool organizer tray 3
5 for each caster, fasten the caster to the tool organizer
tray. Do not overtighten nut.
Fig. B
5
6
4 3
15.16" (385.2 mm)
15.5 - 20" (394-508 mm)
15.16" (385.2 mm)
11.0 lbs (5.0 kg)
300 lbs (136.1 kg)
. Using a spring washer 6 and nut