Publicidad
CHOOSING CASE ADAPTERS
If you know your protective case manufacturer and model, go to
gamevice.com/ ex/adapters to nd the correct adapters for the left
and right side of your controller. Otherwise, utilize the included
Case Adapter Selector to nd the appropriate adapters for your
protective case.
USING THE CASE ADAPTER SELECTOR
Beginning with the slot directly below the START label, attempt to
slide the corner of your phone with the protective case on as shown.
If you cannot slide your phone in freely, move on to the next slot in
the direction indicated by the arrows and try again. The rst slot
that you can slide your phone in freely is your match.
Keep going until your phone can slide in freely into one of the slots.
If your phone does not t into any of the slots, your protective case
is too thick and is not compatible with Gamevice Flex.
SAMPLE INSTRUCTIONS
(Example: L25 and R15A t)
1
Install L25 from box 1 to the left side of the controller as shown in
the Installing Case Adapters section. Install R15A from box 3 to the
right side of the controller. Connect your phone and ensure the
Status Indicator Ring around the App Launch button lights up.
The R15B alternate adapter option shown on the Case Adapter
Selector may provide a tighter t for your protective case. Refer to
the Case Adapters (Right Side) - Advanced Fit Instructions section
for additional instructions.
3
Publicidad
