Technical Description - Gumotex GTX HAND PUMP 2 Manual De Usuario

GB
User´s manual
HAND PUMP
1. Table of Specifications
Hand pump
Dimensions [mm]
Weight [kg]
Capacity [cm ]
3
Max. pressure [kPa]
Hose
4
5

2. Technical description

1 Hand pump body
2 Flexible hose
3 Inflating port (INFLATE / INF)
4 Deflating port (DEFLATE / DEF)
5 PUSH-PUSH Valve adapter for inflating
6 A lever for switching between single (SINGLE
ACTION) and double (DOUBLE ACTION) inflation
7 Analog manometer
3. Instructions for use of
hand-operated pump
NOTICE!
Do not use to inflate tires.
During inflation, monitor the pressure in the structure
to prevent overpressure.
4
GTX HAND PUMP 2/4
110 × 220 × 470
0,8
2 × 2000
80 kPa / 0,8 bar / 11,6 psi
1,25 m, Ø 20 mm (LDPE + EVA)
3
2
1
GTX HAND PUMP
2/4
1,25 m, Ø 20 mm (LDPE + EVA)
6
5
3.1 Inflating
Take the hand pump out of the transportation packing.
Select a suitable adapter depending on the inflated
product and valve.
Attach the flexible hose (2) to the pump into the inflation
hole (3). The hole is marked INFLATE or INF on the pump.
When inflating a boat with PUSH-PUSH valve, conne-
ct the inflation adapter for PUSH-PUSH valve (5) to the
flexible hose (2). Unscrew the inflation valve cap and
attach the hose with the adapter into the closed PUSH-
-PUSH valve (valve stem is in the up position). Inflate the
boat, disconnect the hose with the adapter and close
the valve by its cap.
When inflating parts with a TWIST valve, connect a
suitable adapter to the hose and place it against the
open TWIST valve (turn the valve neck counter-clockwise
to open it). Inflate the part and close the TWIST valve
(tighten the valve neck clockwise).
Version 7/2022
GTX HAND PUMP 3,2/6,4
165 × 170 × 635
275 × 170 × 635
1,5
2 × 3200
100 kPa / 1 bar / 14,5 psi
4
7
2
1
GTX HAND PUMP
3,2/6,4
3