USE AND OPERATION
Upright vacuum cleaner use: assembly
1. Press the protrusion on the tube (2) to insert it in the recess of the
handle release button (3). When you hear a click, the tube is firmly
seated in the handle. To remove it, simply press the release button
(3) and pull the tube out of the vacuum handle as shown in the
pictures below.
2. Insert the vacuum base (13) into the opening of the dust tank (12)
Use as a hand vacuum cleaner
Press the handle release button (3) and detach the hand vacuum
from the handle, then remove the vacuum base (13) and insert the
connector (16) into the dust tank opening (12).
19
|