OPERATION
3.
One push start generator: Press the ON/OFF switch to "ON" position.
4.
One push start generator: Push the switch lightly and keep it for 1s, generator
would get started.
If you failed, please push the switch after 15s. With more than 5 times failure,
please check your generator condition.
NOTICE
Using the electric starter for more than 5 seconds at a time will Overheat the starter motor and can damage it.
5.
Generator needs to operate for 3-5 minutes without load, then it can output
power.
STOPPING THE ENGINE
1.
Move the circuit breaker to the OFF position.
ON/OFF Switch
48
ON
OFF
CIRCUIT
BREAKER