DUROFIX RV2052-WR8 Manual Información Del Producto página 6

the temperature „265 °F".
h. Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the risk of fire.
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of shock or injury.
CAUTION
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may
contact hidden wiring. Contact with 'live' wire will also make exposed metal parts of the tool 'live' and
shock the operator.
Be aware that this tool is always in an operating condition, because it does not have to be plugged
into an electrical outlet. Always set the trigger switch to the locked OFF position when installing or
removing the battery pack or bits.
Do not use bits or sockets larger than those recommended. Large bits or drills may overload the
wrench/driver and damage the motor and gears.
Do not use if chuck jaws or other parts are cracked or worn.
Never change direction of rotation until motor has completely stopped.
Never hold work in your hand, lap, or against other parts of your body when driving.
Do not use drill as a router or try to elongate or enlarge holes by twisting the drill bit. Drill bits may
break and cause injury.
Keep hands away from rotating parts.
Keep drill bit clear of yourself and all objects while installing and removing bit.
Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin
contact when working with these materials. Request, and follow, all safety information available from
your material supplier.
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
SYMBOL
V
n
o
kg
1English1
SPECIFIC SAFETY RULES AND SYMBOLS
NAME
Volts
No Load Speed
Kilograms
SERVICE
SYMBOLS
EXPLANATION
Voltage (potential)
No-load Rotational Speed
Weight
English
-5