auna Kara Illumina Manual De Instrucciones página 39

Problem Potential cause
No sound while The wrong audio source
audio is being was selected on the TV
played via TV or or the stereo system.
stereo system.
The unit has not been
connected to the TV
properly.
No lyrics appear The video cable is not
on the TV screen. properly attached to
the TV.
The video or AV input
was not selected as the
source on the TV.
The TV does not have a
video input.
A CD+G has been
inserted but the CDG
indicator does not light
up.
No picture The source was not set
appears on the TV correctly on the TV.
screen.
The singing from The volume is set
the microphone incorrectly.
cannot be heard.
The microphone is off.
The microphone is not
plugged in properly.
Possible solution
Select the correct audio
source on the TV or
stereo system.
Select the AV input when
connecting the karaoke
system to the TV or
stereo system.
Connect the video cable
to the video output of the
karaoke system and the
video input on the TV.
Set the input source on
the TV to video or AV
input.
Connect the video output
on the unit to an RF
modulator and connect it
to the TV.
Check if it is a CD+G or
clean it.
Select the AV input on
the TV as the source.
Adjust the microphone
volume.
Turn on the microphone.
Insert the plug of the
microphone firmly into
one of the microphone
inputs on the unit.
EN
39