oneConcept CDC 100 Manual De Instrucciones página 25

Programme function
You can programme up to 20 tracks.
1. With the CD player stopped, press the PROG button. Now the PROG
number appears. The PROG symbol and the track number "01" flash.
2. Press the FORWARD/BACK button to select the track.
3. When the desired track is displayed, press the PROG button to save the
track. The PROG number changes to "02". The track number returns to
"00" and flashes together with "PROG".
4. Repeat steps 2 and 3 to add more titles. Up to 20 titles can be programmed
in the memory.
5. Press the PLAY/PAUSE button to play the programme.
6. To delete the programme, simply press the STOP button while the CD is
stopped.
Anti-shock system
The CD player has shock protection to prevent interruption of CD playback in
the event of shocks. The anti-shock system activates automatically when a CD
is played. The display shows "ESP" and flashes.
When the anti-shock memory is full, it protects against interruptions in audio
playback for approx. 60 seconds. If the CD player is subjected to shocks or
fluctuations for longer than the memory lasts, interruptions will occur. This is
normal and to be expected. The sound will return when the CD player is in a
stable position again.
Note: The anti-shock system ensures continuous sound playback when
the unit is subjected to shocks. It does not compensate for errors resulting
from a defective, scratched or dirty CD.
EN
25