Danby Designer DDEF03813BD13 Manual Del Propietário página 13

INSTALLATION INSTRUCTIONS
EMBER BED INSTALLATION
WARNING: The next step involves
glass. Always use extreme caution
when handling glass. Failure to do
so could result in personal injury or
property damage.
This fi replace will come with the
faux log bed pre-installed. To
change to the provided clear
crystals, follow the steps below.
1. The glass should be removed
before installation. Remove
the two screws on the left and
right side of the glass and then
lift the glass panel upward to
remove it.
2. Remove the two screws from
each side of the faux log bed.
3. Remove the faux log bed and
replace the screws.
4. Spread the clear crystals onto
the ember bed.
5. Replace the glass on the front
of the fi replace, ensuring the
locating tabs engage securely
in their corresponding slots and
that the screws are tightened.
1
2
3
4
12