Technical Data - welltherm PB0210 Manual De Instalacion Y Uso

Product composition
CE marking

2.3 - Technical data

PB0210 PB0260
Weight 4.5 kg 5,3 kg
Dimensions, height 392 mm 292 mm
Dimensions, width 592 mm 892 mm
Dimensions, depth 17 mm 17 mm
Mains voltage 1 ~ N PE 230 Volt / 50-60 Hz
Power output 210 W 260 W
Perm. room humidity 70 %
Protection class IP 21
24
The rear side of the heater sized 120 x 60 cm is depicted above.
Legend:
1 Infrared heating
2 Wall bracket (V bracket)
3 Inlet connector for non-heating appliances
The CE marking documents
pliance with the
guidelines in accordance with the nameplate.
The manufacturer retains the declaration of conformity, which can be
viewed on request.
PB0330 PB0340 PB0510 PB0610
7.8 kg 8 kg 11 kg 10.7 kg
592 mm 618 mm 592 mm 392 mm
592 mm 618 mm 892 mm 1,492 mm 1,192 mm
17 mm 17 mm 17 mm 17 mm
330 W 340 W 510 W 610 W
1
3
2
that the products
fundamental requirements
PB0710 PB0910 PB1000 PB1100
14 kg 17 kg 18.5 kg 20.7 kg
592 mm 592 mm 1,200 mm 1,200 mm
1,492 mm 800 mm 900 mm
17 mm 17 mm 17 mm 17 mm
710 W 910 W 1,000 W 1,100 W
are in com-
of the relevant
PB1210 PB1410
21.5 kg 28 kg
750 mm 1,200 mm
1,500 mm 1,200 mm
17 mm 17 mm
1,210 W 1,410 W