Requirements For The Installation Site; Minimum Distances - welltherm BP550 Serie Instrucciones De Instalación Y Funcionamiento

3.3 - Requirements for
the installation site
3.4 - Recommended

Minimum distances

26
· Do not install the product directly below a wall outlet.
· Do not install the product in rooms with excessive humidity.
· The product meets the requirements of protection class IPX4 and is
suitable for installation in protection zone area 2 of wet rooms.
Installation in zones 0 and 1 is not permitted.
· Do not install the product in rooms whose occupants cannot leave it on
their own, unless constant monitoring is ensured.
A
A = 200 mm B = 400 mm
- Do not go below the minimum distance (C) between the rear panel and
the wall. and wall, which is specifi ed by the mounting brackets
(V-brackets).
- Ensure that continuous air circulation is possible between the rear
panel and the wall.
- Generally maintain a minimum distance of 600 mm in all directions to
areas of IP classes 44/65/67.
B
A
C = 30 mm
C