Parts Diagram - Guardian G2-102BX1 Manual De Instrucciones Para El Usuario Y Garantía

CAUTIONS
1. Inspect all parts for possible damage before assembling. If there is any
damage - DO NOT USE. Contact dealer/carrier for further instructions.
Allen hex tool and wrench included for assembly.
2. Make sure that each U-Clip extends fully into the same corresponding hole
of each leg extension. This ensures that the leg extensions are securely
locked in place at an even height.
3. Make sure all screws, nuts and/or bolts are tightened.
4. Make sure the rubber tips are in place on the leg extensions and not
ripped, worn or missing. Replace any missing or damaged tips.
5. The rubber tips of all four leg extensions MUST touch the floor
simultaneously at all times.
6. NEVER stand on chair.

PARTS DIAGRAM

Figure 1
Figure 4
Figure 7
Figure 2
Figure 5
Figure 8
Figure 3
Figure 6
G2-102BX1 (PIC-00303)
REVISED: V1 010423