Abask M18 Manual Del Usuario página 9

parking monitor is enabled, the camera will stay standby
after the engine is turned off. When camera detects
shaking, it will automatically turn on and take a short
video, then return to standby automatically.
Beep: Turn ON / OFF button operation notification sound.
Time Setup: Setup time and date, Use the UP and Down
button to adjust values, press OK to confirm changes.
Date Format: Enable/ Disable the date and time marked
in image files. YYYY-MM-DD / M-M-DD-YYYY/ DD-MM-
YYYY available.
Language : Choose the camera system language.
Light Frequency: Adjust light frequency according to
local regulation, 50Hz/ 60Hz available.
Screen Saver: OFF/30S/1 min/3 min available. Set the
time to automatically turn off the LCD display after no
operation.
Motion Detection: Turn ON / OFF motion detection
function.
Format: Format the memory card.
Reset Setup: Reset all settings back to factorydefault.
Version: Check camera firmware version.
7