Hisense LMT33M6AVE Manual De Instrucciones página 10

Changing the door from the right side to the left
The side at which the door opens can be
changed from the right side (as supplied) to
.
the left side, if the installation site requires.
Tools you will need:
8mm socket driver(1PCS)
.
.
(1PCS)
.
7mm wrench(1PCS)
(1PCS)
Caution
To avoid to injury yourself and/or property,
we recommend someone assist you during
the door reversal process.
.Ensure the Appliance is unplugged and
empty.
.Following steps are generally
recommended
Stand the refrigerator, open the door
and remove the things in the door and close
it.
pen the screw hole cove and the upper
hinge cover which is at the top right corner of
the refrigerator.
screw hole cover
3.Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver
or a spanner(please support the upper
door with your hand when doing it ).
right upper hinge part
4.Remove the right upper hinge part and
screw hole cover place them on ,
smooth surface.
(1PCS)
(1PCS)
upper hinge
cover (right)
special flange
selftapping screws
the
5.Remove upper door and place it on
smooth surface with panel upwards.
6. Loose screws used to fix middle hinge
and remove middle hinge. Then turn middle
hinge by 180. Take washer on axis and put
it on another end. Place it well for use.
7. Remove lower door and place panel
upwards on smooth surface.
8. Change screw hole covers on middle
cover plate from left to right (as shown in
figure below).
Lower hinge part right
Adjustable bottom feet part
Self tapping screws
Note: Before this step, you should lay the
refrigerator on it's back in order to gain access to
the base, you should rest
packaging or similar material to avoid damaging
the cooling pipes at the rear of the refrigerator.
it on soft foam