Preparations For Operation - Steinberg Systems SBS-LHM-5000 Manual De Instrucciones

Control panel overview:
A – PV: measured (actual) temperature
B – SV: (target) temperature setting
C – Heating on/off switch
D – R/MIN: stirrer rotational speed (displayed in rpm)
E – "SET" key: for setting the heating temperature and stirring speed
F – "R/AT" key: auto calibration / go to next display digit to be modified
G – "-": reduces the stirring speed / temperature setting
H – "+": increases the stirring speed / temperature setting
I – Stirring on/off switch
3.2.

Preparations for operation

POSITIONING THE APPLIANCE
Position the appliance where good air circulation is ensured. Maintain a minimum
clearance of 10 cm from all sides of the appliance. Keep the appliance away from
any hot surfaces. Always operate the appliance on a level, firm, clean, fireproof,
and dry surface and out of the reach of children and individuals with reduced
mental, sensory and intellectual capacities. Position the device in such a way that
the power supply plug can be reached at any time. Make sure that the mains
power ratings match the data on the rating plate!