seeger SAC12000S Manual Del Usario página 11

6. SWING
7. SPEED
8. Indicators
9. TIMER
10. UP
11. Digital Display
5.2 INFORMATION APPLICATION "Smart Life"
The "Smart Life" app is available for Android and iOs.
Scan the QR code to go directly to the download. .
How to use the "Smart Life" app.
This device allows you to control the device through your home network.
We recommend that you disconnect the device from the mains when you are out to
prevent it from accidentally turning on while traveling.
Using the app
1.Install the "Smart Life" app. Create a customer account.
2.Enable the WLAN feature in your device's settings.
3.Place the device at a distance of about 5m from your router.
4.As while the device is turned on, the WiFi light will flash. After 3 minutes, the
connection will be disconnected if there is no network configuration and the LED is off. If
you need to reconnect the WLAN, press the "Timer" button for 5 seconds to start the
network setup. The WLAN LED flashes again.
Adjust the air flow direction vertically.
Press to switch the fan speed in HIGH、middle and LOW.
LED for 3 fan speed and WIFI
Sets a time for the unit to automatically start or stop.
Increasing the desired temperature(16 ℃ ～32 ℃ ) or timer
setting.
Displays timer setting and temperature.
11
ENG