Installation Tips
Before you begin installing your new Supertop for Trucks, please read all the
instructions thoroughly.
It is recommended that two people install this Bestop product.
For a smooth fit:
For easier installation, the top should be installed at a temperature above 72° F.
Below this temperature, the fabric may contract an inch or more, making it
difficult to fit the vehicle. You may let the fabric sit in the sun for 15-20 minutes
before installing to let the fabric warm up.
It is normal for the fabric to contract and wrinkle when stored in the shipping
carton. Within a few days after installation, the fabric will relax and the wrinkles
will disappear.
WARNING
Do not rely in any way on the components of this
product to protect against injury or death in the event of an accident.
Never operate the vehicle in excess of manufacturer's specifications.
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit and could
place occupants of the vehicle in a potentially dangerous situation.
Safety glasses should be worn at all
CAUTION
times when installing this product.
-OR-
Tools
9/16" Socket
Ratchet
1/8" Hex
Safety
Key
Glasses
Phillips Screwdriver
Pliers
P1 - 77309 Rev. H 0922
Installation Instructions
Supertop for Trucks
WEAR SEAT BELTS AT ALL TIMES
- OR -
5/16" and 9/16"
Wrench
Measure
T20 Torx Driver
Utility Knife
Qty. 1
Torque Wrench
Installation Instructions - Supertop for Trucks
Installation Time
2 hours
Tape
Skill Level
3 - Moderately Difficult
Vehicle Application:
Ford F-150 2015-Current 5.5' Bed
Part Number 77309
Support
We're here to help! Go to:
https://www.bestop.com
and click on Need Help?
https://www.bestop.com/video-library
© 2020 Bestop, Inc.