Scott Living HDSLFP54W-5A Instrucciones De Montaje página 11

Assembly (continued)
13
Attaching back panels
□
Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no
gaps between the parts. This will help keep the unit square.
□
Pick up the middle back panel (V) and align the pre-drilled holes against the upper long edge with the pilot holes
on the back of top panel (K). Fasten it in place with the provided washer head screws (FF).
□
Using the pilot holes as a guide, align and attach the side back panels (U) to the mantel frame with the washer
head screws (FF).
NOTE: We recommend attaching back panel with the screws at the corners first.
FF
14
Installing door hinges
□
Extend two door hinges (KK) and rest the hinge cups onto the cutouts of each door (R and S). Secure the door
hinges (KK) in place by using two screws (LL) in each.
R
V
U
LL
LL
KK
U
LL
LL
S
KK