Scott Living HDSLFP65W-4A Instrucciones De Montaje página 16

Assembly (continued)
23
Installing the fireplace insert
□
Lift the fireplace insert carefully into the back of the assembled mantel and centre it in the opening.
□
Use the pilot holes as a guide, fasten two large L-shaped brackets (OO) onto the firebox holder (X) with four pan head
screws (PP). Make sure that the right-angle side of metal bracket is flush with the short edge of firebox holder (X).
□
Use the pilot holes as a guide, fasten firebox holder (X) between the partition panels (P and Q) with four pan head
screws (PP).
24
Installing acrylic stopper
□
Remove the paper backing of acrylic stopper (QQ), then properly align the acrylic stopper into the cutout on the
acrylic stopper template on the front of the top panel (K). Press down on the acrylic stopper to help adhesion.
NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat panel television on
the top panel. Otherwise, skip to next step.
□
At the back of top panel (K), grip the heads of plastic tacks with pliers, with twisting motion pull tacks loose to
remove the acrylic stopper template.
L
K
X
P
Q
X
K
PP
OO
X
X
PP
P/Q