Care And Maintenance - Levenhuk Wezzer Cook MT60 Guia Del Usuario

Levenhuk Wezzer Cook MT60 Cooking Thermometer
EN
Levenhuk Wezzer digital cooking thermometers are designed for the temperature measurement of various types of food and dishes
during the cooking process.
Clean the probe thoroughly before and after every use.
Using. Slide the ON/OFF switch to the left to turn the device on. Insert the probes into the corresponding sockets. The temperature
readings for probes 1 and 2 will appear on the LCD right away. Press (1) to turn on the backlight. Press (3) to change the temperature
unit (Celsius, °C / Fahrenheit, °F). Insert the tip of the probe at least 3cm into the measured material. The current temperature will be
shown on the display. Wait a few seconds to let the temperature stabilize.
Temperature alarm setting. Press (2) once to set the temperature alarm for probe 1. Press (1)/(3) to change the value and then
press (2) to confirm. Press (2) twice to set the temperature alarm for probe 2. Press (1)/(3) to change the value and then press (2) to
confirm.
Timer settings. Slide the COOK/TIMER switch to the left to turn the timer on. Press (2) to set the timer. The digits that are to be set
will start flashing. Press (1)/(3) to change the value and then press (2) to continue. The setting order: Hours > Minutes. Press (2) to
turn the timer on or off. Press (1) and (2) simultaneously to reset the timer.
Suggested preset temperatures for various meat types and degrees of doneness:
Meat type
Ground Beef
Ground Poultry
Beef
Veal
Chicken/Poultry
Pork
Lamb
Fish
Program
Specifications
Operating temperature range, °C/°F
Probe length, mm
Сable length, m
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Never leave the thermoprobe inside a working oven or microwave, remove the device immediately after measuring the temperature.
Keep the device away from open flames and hot surfaces. Always wear protective gloves during and after using the thermoprobe
due to the risk of burns. After each usage, wash the steel probe in soapy or running water. Place the steel probe in hot water for a
few minutes in order to sterilize it. Do not submerge the digital device in water; only the steel probe is waterproof. The device is not
dishwasher safe. Never use a damaged device. Use the device only for its intended purpose. The device is suitable for indoor use
only. Strictly follow the instructions and do not disassemble or drop the device as it may result in a loss of functionality. Children
should use the device under adult supervision only.
Doneness
Well done
Well done
Well done
Medium Well
Medium
Medium rare
Rare
Well done
Medium Well
Medium
Medium rare
Rare
Well done
Well Done
Medium Well
Medium
Well done
Medium Well
Medium
Medium rare
Rare
Well done
—
Refer preset temperatures
°C
71°C
74°C
77°C
71°C
66°C
60°C
52°C
74°C
71°C
66°C
60°C
52°C
74°C
77°C
74°C
71°C
77°C
74°C
71°C
63°C
60°C
63°C
63°C
–50... +300/–58... +572
100
1
2pcs AAA batteries
4
°F
160°F
165°F
171°F
160°F
151°F
140°F
126°F
165°F
160°F
151°F
140°F
126°F
165°F
170°F
165°F
160°F
171°F
165°F
160°F
145°F
140°F
145°F
145°F