Tabla de contenido
Publicidad
STEP 1: WHAT'S IN THE BOX
1 . Webcam with attached USB-C cable
2 . Mount clip with removable
mount adaptor
3 . User documentation
STEP 2: DETERMINE MOUNT PLACEMENT
Placement to allow one-handed camera
adjustments (using micro-suction pad)
1 . Determine the best placement for
your webcam before continuing .
2 . Wipe the back of your monitor to clear
any dust or dirt .
3 . Remove the protective film from
the micro-suction pad .
4 . Open the mount fully and place on top
of your monitor, being sure that the pad
of the front clip makes contact with the
front of the monitor .
5 . Rotate the rear foot down until it makes
contact with the back of the monitor .
6 . Press the micro-suction pad to the back
of your monitor firmly to create a good
bond .
Note:
– The mount adaptor can be removed and reused for
mounting adjustments without leaving residue .
– To clean the micro-suction pad, rinse with water
to remove debris, and let it air dry in order
to regain strong suction .
USB-C
4
English
Publicidad
Tabla de contenido
