Basic Use; Adjusting The Volume - Oglo MS-O-700-D Instrucciones De Uso

basic use

Switching the appliance on or off
To turn on the mini-stereo, plug one end of the power cord into the back of the mini-stereo and then
1.
plug the other end into a wall outlet.
Press the button
2.
last active source.
To turn off the mini-stereo, press the button
3.
NOTE: your appliance has an auto sleep function. If no audio signal is detected within 15 minutes
(excluding FM radio), it will automatically switch into standby mode.
Selecting an audio source
Select your playback source by pressing the button
the remote control: CD, LINE IN, BLUETOOTH, USB and FM TUNER.

Adjusting the volume

To increase or decrease the volume, turn the volume dial on the front of the mini-stereo or press the
•
buttons VOL + and VOL - on the remote control.
To mute the volume, press the button
•
button again, press the buttons VOL + and VOL - on the remote control or turn the knob on the
front of the appliance.
Modifying the sound effects
Repeatedly press the button EQ on the remote control to select the desired sound effect: ROCK, POP,
FLAT, JAZZ or CLASSIC.
Setting the time
In standby mode, press and hold the button CLOCK on the remote control to enter settings mode,
•
then use the buttons
Press the button CLOCK again to confirm.
•
Then press the buttons
•
Press the button CLOCK again to confirm.
•
In playback mode, press the button CLOCK to display the time for 5 seconds.
22
on the remote control or on the appliance. The mini-stereo lights up on the
on the remote control. To reactivate the sound, press the
and to select a 12hr or 24hr format.
and to set the time.
on the remote control or on the appliance again.
on the mini-stereo or the button SOURCE of