Filling Water - aspiron AS-CA001 Manual Del Usuario

EN

Filling Water

1
07 Steam Mop Cleaner
1
Open water tank cap.
Fully fill in with water using the included
measuring cup. It's recommended to
use purified water to avoid any scales
blocking the steam nozzle.
Close the tank cap.
Cleaning
Plug the cleaner in, hold the handle firmly.
1
Press the Power button to turn on and Steam
button to adjust desired steam levels.
Slowly move the cleaner back and forth
over dirty area on floor until it is cleaned.
Press Power button to turn off, unplug the
cleaner at last.
Warning:
The cleaner will preheat for about 45s
before releasing steam after its first
turning on, please do not approach
the steam nozzle during preheating
to avoid scald.
Cleaning Tips
• After continuous working for 30 minutes, the cleaner will pause for 40 minutes
automatically for overheating protection.During protection, the cleaner cannot be
turned on and operated.
• Using time varies with ground friction, and it will be shortened on rough floors.
• To avoid damage, especially to some delicate wooden floors, make sure the floor on
which the high-temp steam can be used.
• DO NOT stay or wipe in a same place too long while steaming.
EN
Steam Mop Cleaner 08