Technical Data - Lelit PS09N Manual De Instrucciones

PLEASE NOTE:
The use of normal tap water is recommended. In order to clean the boiler and remove limestone, rinse it internally
(every 15-20 litres of water used or every month) only with tap water.

TECHNICAL DATA:

Max socket power:800W
Boiler power : 1000W
Working pressure: 3,5 bar
Max. pressure: 5,5 bar
Tank nominal capacity: 2,5 litres
TROUBLESHOOTING
PROBLEM
1) the nozzle or gun 1) While filling the tank you may
leak water mixed have poured too much water into it.
with steam
2) There is no steam 1) The steam knob might be closed
coming out of the
nozzle or gun 2) The foot pedal is not plugged in
3) The boiler switch might be off
4) The water might be used up.
The inserted data and pictures can be subject to changes without previous notice for the improvement of the
machine's performances.
All manuals and user guides at all-guides.com
EXPLANATION SOLUTION
1) The problem will go on until the excess water
emptied. Keep the steam button depressed until the
water in the tank is at the correct level.
1) Open the steam knob anticlockwise.
2) Plug the 4-pin receptacle into the boiler.
3) After the boiler switch comes on, wait for 10 minutes
so the boiler produces steam.
4) Fill it following the instructions carefully.
English
is
Pag. 5