RugDoctor TDC-1 Manual Del Usuario página 12

How to Use:
upholstery tool
1
Raise the Collapsible
Handle
Raise the HANDLE by
pulling upward into the
upright position.
For best results, lower
the HANDLE to it's
lowest position by pulling
the HANDLE RELEASE
lever upward.
3
Fill the Clean Water Tank
Unscrew the EASY MEASURE
SOLUTION POUR CAP from
the CLEAN WATER TANK.
Fill the CLEAN WATER TANK
with HOT tap water until it
reaches the fill line.
4
Add Rug Doctor Cleaning Solution
Follow the directions on the back of
the Rug Doctor cleaning solution and
fill the EASY MEASURE SOLUTION
POUR CAP with the recommended
ounces of solution.
Clean water tank holds 1 gallon
of water. Tightly screw the EASY
MEASURE SOLUTION POUR CAP
onto the tank.
12
Fill Line
R U G D O C T O R P E T T R U D E E P C L E A N E R
2
Remove Clean
Water Tank
Remove the CLEAN
WATER TANK from the
machine by grasping the
tank HANDLE and lifting
straight up.
REMEMBER
Always use RUG DOCTOR
deep cleaning solutions.
Other cleaning solutions may harm
the machine and void the machine
and carpet warranties.
5
Place Clean Water
Tank in Machine
Securely place the
full CLEAN WATER
TANK back onto the
machine.
™ | U s e r M a n u a l