Milwaukee 0931-20 Manual Del Operador página 7

Replace fleece dust bag once the bag is at full ca-
pacity, suction decreases or dust bag is damaged.
Before storing your vacuum, empty and clean the
tank, filter, and accessories. Unplug the vacuum.
MAINTENANCE
WARNING
the tool before performing any maintenance.
Never disassemble the tool. Contact a
MILWAUKEE service facility for ALL repairs.
Never use vacuum without tank and filter properly
installed.
Maintaining the Filters
Keep filter clean. Clean the filter by twisting the filter
cover counter-clockwise to unlock from the motor
housing/float cage. Pull the filter away from the
vacuum. Empty debris by holding away from the
user's face and tap clean. Water may be used to
clean the filter.
If cleaning high efficiency filters with water, let filter
dry 24 hours before using with vacuum. Replace filter
if damaged or suction decreases (Dry filters single
pack, Cat. No. 49-90-1977, 49-90-1978 or Wet filter
single pack Cat. No. 49-90-1990).
Maintaining Tool
Keep your tool in good repair by adopting a regular
maintenance program. Inspect your tool for issues
such as undue noise, misalignment or binding of
moving parts, breakage of parts, or any other condi-
tion that may affect the tool operation. Return the tool
to a MILWAUKEE service facility for repair. After six
months to one year, depending on use, return the
tool to a MILWAUKEE service facility for inspection.
Storage
To reduce the risk of
injury, always unplug
WARNING
shock and damage, never immerse your tool in
liquid or allow a liquid to flow inside it.
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or
combustible solvents around tools.
For repairs, return the tool to the nearest authorized
service center.
ACCESSORIES
WARNING
may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
Compatible with 0931-20 6.5 peak HP Wet/Dry
Vacuum Motor Head
0922-20
6 Gallon Wet/Dry Vacuum Tank
0912-20
9 Gallon Wet/Dry Vacuum Tank
0932-20
12 Gallon Wet/Dry Vacuum Tank
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
www.milwaukeetool.com
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.948.2360
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
7
To reduce the risk of
personal injury, electric
Cleaning
Repairs
Use only recommended
accessories. Others
(1.800.729.3878)