For cleaning, do not use flammable or aggressive detergents or abrasive cloths. Use a damp cloth. Wait for
complete dry before switch it on.
If the product will not be used for long time, disconnect it from the mains and store it using the original
package, if possible.
To control the appliance, gently pull the control cord; do not apply excessive force, so as not to damage the
mechanism.
Do not modify the appliance: do not reduce or shield the radiant surface and avoid applying any type of
reflecting material.
Do not use the appliance for drying linen or clothing.
Do not direct particularly cold air flows towards the appliance, in order to prevent any thermal stress on the
heating element.
Do not use the product upside down.
PARTS DESCRIPTIONS
USE
The activation and deactivation of the device takes place by successive pulling of the control cord placed under
the center, until it clicks. A moderate traction is sufficient, not sudden and not beyond the click, which will be
clearly audible and which will correspond to the change in the operating state.
It is advisable to avoid turning the appliance on and off repeatedly and consecutively: the switch or the heating
element could be damaged.
It is also advisable not to stand for prolonged periods in direct correspondence with the heating beam produced
by the appliance.
MOST COMMON PROBLEMS SOLUTION
The only conceivable operating problem for the appliance is its failure to switch on, for which it is advisable to
check the electrical connection, the presence of mains voltage and any automatic disconnection of the switch
from the electrical panel.
If the previous checks do not solve the problem, or in any other case of operating anomalies, it is necessary to
contact qualified technical people.
6