Mac Mah LS1200 Manual De Usuario página 7

tracks.
6. MUTE: Press this button to mute the USB/BT player
7. SD: Connect your SD card here.
8. USB: Connect your USB card here.
9. MIC VOL: Use this knob to adjust the volume of microphone.
10. MIC ECHO: Use this knob to adjust the echo of microphone.
11. TREBLE: Use this knob to adjust the treble of output.
12. BASS: Use this knob to adjust the bass of output.
13. SUB VOL: Use this knob to adjust the volume of sub output.
14. Master VOL: Use this knob to adjust the master volume.
CONNECTIONS
1. MIC INPUT: Connect your microphone here (jack 6.35mm or XLR balanced)
2. LINE INPUT: Connect your line signal here (jack 6.35mm or XLR balanced)
3. AUX INPUT: Connect your AUX signal here (RCA unbalanced)
4. AUX OUTPUT: Connect this line output signal to the input of another active
speaker (RCA unbalanced)
5. MIX OUTPUT: Connect this output to another active speaker (XLR balanced)
6. SAT1 OUTPUT: Connect this output to the satellite 1 speaker with the supplied
speakon cable.(Speakon 1+ / 1-)
7. Power: Press this switch to turn ON/OFF this unit.
7