Remote Control; Bluetooth Connection - Mac Mah LS1200 Manual De Usuario

REMOTE CONTROL

BLUETOOTH CONNECTION

To play Bluetooth signal, enable the Bluetooth function on a Bluetooth device like cell
phone and set the speaker to Bluetooth input mode and then search for available
Bluetooth devices nearby on cell phone.
The Bluetooth name of the speaker is
pairing code.
Note: The MODEL is only discoverable when input is set to Bluetooth.
POWER: Press this key to power ON/OFF USB decoder.
Mode: Press this key to switch among all input modes.
SB/SD: Press this key to quickly switch input mode between
USB and SD inputs.
MUTE: Press this key to mute speaker outputs.
Previous: Press this button to go back to previous track.
Play/Pause: Press this button to play. Press again to pause.
Next: Press this button to go to next track.
Volume Controls: Press either of these keys to decrease or
increase the volume of main output.
Repeat/Random: Press this key to repeat current track, all
tracks or play random tracks.
EQ: Press this key to switch among all preset equalization
modes.
Number keys: Use this key to enter the track number and
quickly go to that track.
"MAC MAH". Pair and connect. There is no
8