T'nB HPSPBALL Manual De Instrucciones página 4

Use hPSPBALL_toflashat100% 04/04/14 17:33 Page3
All manuals and user guides at all-guides.com
U
SE
1. To charge the speaker
Please note: before first using your new spea-
nvironment
ker, charge it using the USB cable supplied:
and 45°C.
• Either via the USB port on your computer.
hildren.
• Or via an optional USB charger (this accessory
to repair it
is available on our web site www.t-nb.com).
• While charging continues, the red LED on the
subject to
speaker remains lit.
• Charging time: approximately 2 hours.
onnect your
• NB: When the battery is low, the LED flashes
d any other
and the speaker emits a warning signal.
not using it.
ase do not
2. To switch the speaker on/off:
other data
• Activate the on/off button at the back of the
speaker.
3. To pair the T'nB device with your Blue-
tooth
®
1) Enable the Bluetooth
smartphone/tablet/MP3 player, etc and start
the device search (see your Bluetooth
vice's instructions).
2) Switch the T'nB device ON.
3) The LED flashes rapidly. The T'nB device is
in pairing mode.
t
able
device (phone, tablet, MP3 ...):
function on your
®
4) Select the TNB SPEAKER device
from the list offered on your device.
5) Depending on the model, either the
device connects automatically, or you have
to enter the password 0000. When pairing is
successful, the blue LED flashes.
Once paired, the T'nB device automatically
recognizes your device as soon as you turn it on.
4. Use :
• To adjust the volume:
Adjust the speaker volume level using the +
and – buttons.
If you are using the speaker with your phone:
• To answer a call or hang up:
Press the speaker's Play button (2) once.
• To make a call:
Dial the number from your phone and then
start the call.
de-
®
EN