Optional Equipment - Actim 1ngeni Manual De Instrucciones

Optional equipment

32
OPTIONAL EQUIPMENT
Optional equipment that can be used with the Actim 1ngeni instrument can be purchased separately from their
supplier:
• USB key
• Label printer, the Seiko SLP620 and SLP650
• Barcode scanner, the Datalogic QuickScan Barcode Wand QD2430
In addition to these, it is possible to use an external power pack (Tekkeon MP3450).
Three ferrite cores are supplied with the Actim 1ngeni instrument. The ferrite must be fit
into the following accessories prior to the use of the instrument:
Place the USB peripheral cable inside the ferrite core; the distance from the ferrite core
to the USB connector base should be 29±2mm
Lock the cable into place by pushing the cable down.
Close the ferrite core once the cable is in the correct position.