Aqara Smart Pet Feeder C1 Manual Del Usuario página 5

Device Binding & Initialization
1. This product requires an Aqara Zigbee 3.0 hub. Please add the hub
to the app according to the corresponding manual.
2. Click "+" in the upper right corner of the home page in the app to
enter the "Add Accessory" page. Select "Smart Pet Feeder C1" and
the hub to be connected, and follow the instructions on the app.
Hold the reset button for 5 seconds, and then the hub will be
connected.
Device Setting
Click the "..." in the upper right corner in the home page of the device
to adjust the settings of the feeding plan, child lock, etc.
Power Supply
1. Please use the adapter to supply power to the feeder under normal
circumstances.
2. The Smart Pet Feeder C1 can also work with dry batteries. Please
open the battery cover at the bottom and put in batteries. In case of
any power failure, the batteries can ensure the power supply.
3. Dry batteries need to be purchased separately. Three D batteries
(LR20 alkaline batteries) are required.
4. When the device is powered by dry batteries, the indicator light will
stay o to save energy, but other functions still work as usual.
*Note:
1. Di erent types of batteries or new and used batteries are not to be
mixed.
2. Insert batteries in the correct polarity as indicated in the battery
compartment.
3. Non-rechargeable batteries are not to be recharged.
4. Waste batteries should be recycled in line with the local laws and
regulations. Do not dispose of them at will to avoid pollution.
5. If the appliance is to be stored unused for a long period, the
batteries should be removed.
6. The supply terminals are not to be short-circuited.
7. Exhausted batteries are to be removed from the appliance and
safely disposed of.
Food Bucket Cleaning
Press the clips on both sides of the food bucket, and you can take it
out to clean.
-3-