Important - Cojali jaltest tools 50105082 Manual De Usuario

7
EN

IMPORTANT:

During the tool assembly, take into account the sleeve position. The
non-centring end must be placed next to the cover, so the centring end will be on
the other side in order to centre the silentblock housing.
3.2 SILENTBLOCK DISASSEMBLY
IMPORTANT:
The silentblock must be replaced on both sides of the axle. To ensure
that the new silentblock is in the same position as the old one, see the mark in the
centre of the silentblock and move that point to the centre of the axle housing.
1.
Mark the centre point of the silentblock and move it to the centre of the housing.
2.
With a white pencil, draw a line on the outside of the silentblock housing. This line
will help orientate the new silentblock in the housing.