Before First Use; Before Use - Silvercrest SKMS 180 A1 Instrucciones De Utilización Y De Seguridad

Lay the power cord
extension cords in such a way
that they may not be tripped over
or otherwise damaged.
No action is needed from users
to shift the product between 50
and 60 Hz. The product adapts
itself for both 50 and 60 Hz.
Fill the product at least up to
the MIN mark
(approx. 1 tbsp) of coffee beans.
Do not fill the product with more
than 70 g (approx. 8 tbsp) of
coffee beans.
Do not exceed the
MAX mark
Cleaning and care
m WARNING! Risk of injury!
Disconnect the power plug
from the socket outlet before
cleaning and when not in use.
m CAUTION! Risk of injury!
Care shall be taken when
handling the sharp cutting
blade and when emptying
6 ] [
the container
and
[ 8 ]
or with 7 g
[ ]
.
[ ]
8 ] [
.
2 ] [
Do not pull the power plug out
of the socket outlet by the power
cord .
[ 8 ]
Protect the product, its power
cord and power plug
dust, direct sunlight, dripping and
splashing water.
Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
˜ Before first use
Remove the packaging material. Check if all
parts are complete.
Operate the product empty in order to
let any production residues evaporate
(approx. 45 seconds).
˜ Before use
Clean the product (see "Cleaning and care").
Place the product on a suitable and level
surface.
Unwind the power cord
retainer . Guide the power cord through the
5 ] [
recess on the edge of the housing.
Connect the power plug
Now, the product is ready for use.
against
8 ] [
from the cord
8 ] [
to a socket outlet.
8 ] [
GB/IE 21